Company | XK8/R | XJS | Parts | Services | Customer Cars | News | Contact Us

                                 News

 

Latest developments will be published shortly but as a brief overview the rear light 'XF' conversion has been successful and the rear bumper and side skirt molds have been produced and panels completed we still have to produce an 'air dam' to fit onto the rear bumper to aid as extra down force and to cover the boot floor. Pictures will be put on this page shortly.

 

Paragon Design is always developing new ideas and making  these projects available to the Jaguar XK owner.

A glimpse of the new XK Front utilising the look of the 2007 XKR. As you can see from this picture we have also used the later style sill covers, bonnet/hood vents  and 20" wheels. The wheels require specially made adapter/spacers to compensate for the different PCD.

 You do have to use your imagination to a certain degree!

 

This new type of lamp replaces the existing glass 'sub assembly' and fixes directly onto the main light unit. When it is finished it will have aluminium bezels and protective glass, the side light will be incorporated into the main beam bezel using a series of LED's giving an angel eyes effect.

Mesh grilles will be fitted to all apertures and the openings to the left and right of the main grilles which would normally have fog lights will be used to aid brake cooling and to pipe direct cool air to the air intake box 

This car will be fitted with our manual 6 speed box (Finally!)

The car will be stripped out and roll cage fitted. Complete with racing seats and 4 or 6 point harnesses. Where the back seat was will be used to accommodate the 2 NOS bottles! 

 

 

Wing 'gills' and revised side repeater position

The rear bumper is from an Aston Martin AMV8 and a central 'air dam' is currently being produced incorporating a 'LED' rear fog light. We have changed the rear lights  and fitted XF  units!

The bonnet/hood has had an air scoop fitted this will aid engine cooling and also looks pretty damn cool!  

The bonnet/hood and wings have been made all in steel. We are considering re-producing these items in GRP if demand is great enough. 

Hit Counter

Page Designed and Maintained by
Century Oak Web & Graphics Design © 2005